BlaR1 peptidase M56; Production of beta-Lactamase and penicillin-binding protein 2a (which ...
6-298
2.86e-27
BlaR1 peptidase M56; Production of beta-Lactamase and penicillin-binding protein 2a (which mediate staphylococcal resistance to beta-lactam antibiotics) is regulated by a signal-transducing integral membrane protein and a transcriptional repressor. The signal transducer is a fusion protein with penicillin-binding and zinc metalloprotease domains. The signal for protein expression is transmitted by site-specific proteolytic cleavage of both the transducer, which auto-activates, and the repressor, which is inactivated, unblocking gene transcription. homologs to this peptidase domain, which corresponds to Merops family M56, are also found in a number of other bacterial genome sequences.
Pssm-ID: 428523 Cd Length: 296 Bit Score: 111.79 E-value: 2.86e-27
Peptidase M56-like including those in BlaR1 and MecR1, integral membrane metallopeptidase; ...
109-302
4.34e-24
Peptidase M56-like including those in BlaR1 and MecR1, integral membrane metallopeptidase; This family contains peptidase M56, which includes zinc metalloprotease domain in MecR1 as well as BlaR1. MecR1 is a transmembrane beta-lactam sensor/signal transducer protein that regulates the expression of an altered penicillin-binding protein PBP2a, which resists inactivation by beta-lactam antibiotics, in methicillin-resistant Staphylococcus aureus (MRSA). BlaR1 regulates the inducible expression of a class A beta-lactamase that hydrolytically destroys certain ?-lactam antibiotics in MRSA. Both, MecR1 and BlaR1, are transmembrane proteins that consist of four transmembrane helices, a cytoplasmic zinc protease domain, and the soluble C-terminal extracellular sensor domain, and are highly similar in sequence and function. The signal for protein expression is transmitted by site-specific proteolytic cleavage of both the transducer, which auto-activates, and the repressor, which is inactivated, unblocking gene transcription. All members contain the zinc metalloprotease motif (HEXXH). Homologs of this peptidase domain are also found in a number of other bacterial genome sequences, most of which are as yet uncharacterized.
Pssm-ID: 320700 [Multi-domain] Cd Length: 187 Bit Score: 99.71 E-value: 4.34e-24
BlaR1 peptidase M56; Production of beta-Lactamase and penicillin-binding protein 2a (which ...
6-298
2.86e-27
BlaR1 peptidase M56; Production of beta-Lactamase and penicillin-binding protein 2a (which mediate staphylococcal resistance to beta-lactam antibiotics) is regulated by a signal-transducing integral membrane protein and a transcriptional repressor. The signal transducer is a fusion protein with penicillin-binding and zinc metalloprotease domains. The signal for protein expression is transmitted by site-specific proteolytic cleavage of both the transducer, which auto-activates, and the repressor, which is inactivated, unblocking gene transcription. homologs to this peptidase domain, which corresponds to Merops family M56, are also found in a number of other bacterial genome sequences.
Pssm-ID: 428523 Cd Length: 296 Bit Score: 111.79 E-value: 2.86e-27
Peptidase M56-like including those in BlaR1 and MecR1, integral membrane metallopeptidase; ...
109-302
4.34e-24
Peptidase M56-like including those in BlaR1 and MecR1, integral membrane metallopeptidase; This family contains peptidase M56, which includes zinc metalloprotease domain in MecR1 as well as BlaR1. MecR1 is a transmembrane beta-lactam sensor/signal transducer protein that regulates the expression of an altered penicillin-binding protein PBP2a, which resists inactivation by beta-lactam antibiotics, in methicillin-resistant Staphylococcus aureus (MRSA). BlaR1 regulates the inducible expression of a class A beta-lactamase that hydrolytically destroys certain ?-lactam antibiotics in MRSA. Both, MecR1 and BlaR1, are transmembrane proteins that consist of four transmembrane helices, a cytoplasmic zinc protease domain, and the soluble C-terminal extracellular sensor domain, and are highly similar in sequence and function. The signal for protein expression is transmitted by site-specific proteolytic cleavage of both the transducer, which auto-activates, and the repressor, which is inactivated, unblocking gene transcription. All members contain the zinc metalloprotease motif (HEXXH). Homologs of this peptidase domain are also found in a number of other bacterial genome sequences, most of which are as yet uncharacterized.
Pssm-ID: 320700 [Multi-domain] Cd Length: 187 Bit Score: 99.71 E-value: 4.34e-24
Peptidase M56-like including those in BlaR1 and MecR1, integral membrane metallopeptidase; ...
198-248
2.03e-06
Peptidase M56-like including those in BlaR1 and MecR1, integral membrane metallopeptidase; This family contains peptidase M56, which includes zinc metalloprotease domain in MecR1 as well as BlaR1. MecR1 is a transmembrane beta-lactam sensor/signal transducer protein that regulates the expression of an altered penicillin-binding protein PBP2a, which resists inactivation by beta-lactam antibiotics, in methicillin-resistant Staphylococcus aureus (MRSA). BlaR1 regulates the inducible expression of a class A beta-lactamase that hydrolytically destroys certain ?-lactam antibiotics in MRSA. Both, MecR1 and BlaR1, are transmembrane proteins that consist of four transmembrane helices, a cytoplasmic zinc protease domain, and the soluble C-terminal extracellular sensor domain, and are highly similar in sequence and function. The signal for protein expression is transmitted by site-specific proteolytic cleavage of both the transducer, which auto-activates, and the repressor, which is inactivated, unblocking gene transcription. All members contain the zinc metalloprotease motif (HEXXH). Homologs of this peptidase domain are also found in a number of other bacterial genome sequences, most of which are as yet uncharacterized.
Pssm-ID: 320685 [Multi-domain] Cd Length: 165 Bit Score: 48.07 E-value: 2.03e-06
Peptidase M48 subfamily B HtpX-like membrane-bound metallopeptidase; This HtpX family of ...
194-248
3.24e-03
Peptidase M48 subfamily B HtpX-like membrane-bound metallopeptidase; This HtpX family of peptidase M48 subfamily B includes uncharacterized HtpX homologs and consists of proteins smaller than Ste24p, with homology restricted to the C-terminal half of Ste24p. HtpX expression is controlled by the Cpx stress response system, which senses abnormal membrane proteins. HtpX participates in the proteolytic quality control of these misfolded proteins by undergoing self-degradation and collaborating with FtsH, a membrane-bound and ATP-dependent protease, to eliminate them. HtpX, a zinc metalloprotease with an active site motif HEXXH, has an FtsH-like topology, and is capable of introducing endoproteolytic cleavages into SecY (also an FtsH substrate). However, HtpX does not have an ATPase activity and will only act against cytoplasmic regions of a target membrane protein. Thus, HtpX and FtsH have overlapping and/or complementary functions, which are especially important at high temperature; in E. coli and Xylella fastidiosa, HtpX is heat-inducible, while in Streptococcus gordonii it is not.
Pssm-ID: 320696 [Multi-domain] Cd Length: 203 Bit Score: 39.22 E-value: 3.24e-03
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
