patatin-like phospholipase domain-containing protein may function as a lipid acyl hydrolase, catalyzing the cleavage of fatty acids from membrane lipids
Patatins and Phospholipases; Patatin-like phospholipase. This family consists of various ...
42-552
0e+00
Patatins and Phospholipases; Patatin-like phospholipase. This family consists of various patatin glycoproteins from plants. The patatin protein accounts for up to 40% of the total soluble protein in potato tubers. Patatin is a storage protein, but it also has the enzymatic activity of a lipid acyl hydrolase, catalyzing the cleavage of fatty acids from membrane lipids. Members of this family have also been found in vertebrates. This family also includes the catalytic domain of cytosolic phospholipase A2 (PLA2; EC 3.1.1.4) hydrolyzes the sn-2-acyl ester bond of phospholipids to release arachidonic acid. At the active site, cPLA2 contains a serine nucleophile through which the catalytic mechanism is initiated. The active site is partially covered by a solvent-accessible flexible lid. cPLA2 displays interfacial activation as it exists in both "closed lid" and "open lid" forms.
The actual alignment was detected with superfamily member cd07203:
Pssm-ID: 416256 Cd Length: 552 Bit Score: 683.32 E-value: 0e+00
Fungal Phospholipase B-like; cPLA2 GrpIVA homologs; catalytic domain; Fungal phospholipase B are Group IV cPLA2 homologs. Aspergillus PLA2 is Ca-dependent, yet it does not contain a C2 domain. PLB deacylates both sn-1 and sn-2 chains of phospholipids and are abundantly expressed in fungi. It shows lysophospholipase (lysoPL) and transacylase activities. The active site residues from cPLA2 are also conserved in PLB. Like cPLA2, PLB also has a consensus sequence of Sm-X-Nu-Sm (Sm = small residue, X = any residue and Nu = nucleophile). It includes PLB1 from Schizosaccharomyces pombe, PLB2 from Candida glabrata, and PLB3 from Saccharomyces cerevisiae. PLB1, PLB2, and PLB3 show PLB and lysoPL activities; PLB3 is specific for phosphoinositides.
Pssm-ID: 132842 Cd Length: 552 Bit Score: 683.32 E-value: 0e+00
Lysophospholipase catalytic domain; This family consists of Lysophospholipase / phospholipase ...
98-548
6.15e-128
Lysophospholipase catalytic domain; This family consists of Lysophospholipase / phospholipase B EC:3.1.1.5 and cytosolic phospholipase A2 EC:3.1.4 which also has a C2 domain pfam00168. Phospholipase B enzymes catalyze the release of fatty acids from lysophsopholipids and are capable in vitro of hydrolysing all phospholipids extractable form yeast cells. Cytosolic phospholipase A2 associates with natural membranes in response to physiological increases in Ca2+ and selectively hydrolyses arachidonyl phospholipids, the aligned region corresponds the the carboxy-terminal Ca2+-independent catalytic domain of the protein as discussed in.
Pssm-ID: 366778 Cd Length: 490 Bit Score: 385.18 E-value: 6.15e-128
Fungal Phospholipase B-like; cPLA2 GrpIVA homologs; catalytic domain; Fungal phospholipase B are Group IV cPLA2 homologs. Aspergillus PLA2 is Ca-dependent, yet it does not contain a C2 domain. PLB deacylates both sn-1 and sn-2 chains of phospholipids and are abundantly expressed in fungi. It shows lysophospholipase (lysoPL) and transacylase activities. The active site residues from cPLA2 are also conserved in PLB. Like cPLA2, PLB also has a consensus sequence of Sm-X-Nu-Sm (Sm = small residue, X = any residue and Nu = nucleophile). It includes PLB1 from Schizosaccharomyces pombe, PLB2 from Candida glabrata, and PLB3 from Saccharomyces cerevisiae. PLB1, PLB2, and PLB3 show PLB and lysoPL activities; PLB3 is specific for phosphoinositides.
Pssm-ID: 132842 Cd Length: 552 Bit Score: 683.32 E-value: 0e+00
Cytosolic phospholipase A2, catalytic domain; hydrolyses arachidonyl phospholipids; Catalytic domain of cytosolic phospholipase A2 (PLA2; EC 3.1.1.4) hydrolyzes the sn-2-acyl ester bond of phospholipids to release arachidonic acid. At the active site, cPLA2 contains a serine nucleophile through which the catalytic mechanism is initiated. The active site is partially covered by a solvent-accessible flexible lid. cPLA2 displays interfacial activation as it exists in both "closed lid" and "open lid" forms. Movement of the cPLA2 lid possibly exposes a greater hydrophobic surface and the active site. cPLA2 belongs to the alpha-beta hydrolase family which is identified by a characteristic nucleophile elbow with a consensus sequence of Sm-X-Nu-Sm (Sm = small residue, X = any residue and Nu = nucleophile). Calcium is required for cPLA2 to bind with membranes or phospholipids. Group IV cPLA2 includes six intercellular enzymes: cPLA2alpha, cPLA2beta, cPLA2gamma, cPLA2delta, cPLA2epsilon, and cPLA2zeta.
Pssm-ID: 132835 [Multi-domain] Cd Length: 438 Bit Score: 400.85 E-value: 9.66e-135
Lysophospholipase catalytic domain; This family consists of Lysophospholipase / phospholipase ...
98-548
6.15e-128
Lysophospholipase catalytic domain; This family consists of Lysophospholipase / phospholipase B EC:3.1.1.5 and cytosolic phospholipase A2 EC:3.1.4 which also has a C2 domain pfam00168. Phospholipase B enzymes catalyze the release of fatty acids from lysophsopholipids and are capable in vitro of hydrolysing all phospholipids extractable form yeast cells. Cytosolic phospholipase A2 associates with natural membranes in response to physiological increases in Ca2+ and selectively hydrolyses arachidonyl phospholipids, the aligned region corresponds the the carboxy-terminal Ca2+-independent catalytic domain of the protein as discussed in.
Pssm-ID: 366778 Cd Length: 490 Bit Score: 385.18 E-value: 6.15e-128
Group IVA cytosolic phospholipase A2; catalytic domain; Ca-dependent; Group IVA cPLA2, an 85 ...
61-402
8.82e-24
Group IVA cytosolic phospholipase A2; catalytic domain; Ca-dependent; Group IVA cPLA2, an 85 kDa protein, consists of two domains: the regulatory C2 domain and the alpha/beta hydrolase PLA2 domain. Group IVA cPLA2 is also referred to as cPLA2-alpha. The catalytic domain of cytosolic phospholipase A2 (cPLA2; EC 3.1.1.4) hydrolyzes the sn-2-acyl ester bond of phospholipids to release arachidonic acid. At the active site, cPLA2 contains a serine nucleophile through which the catalytic mechanism is initiated. The active site is partially covered by a solvent-accessible flexible lid. cPLA2 displays interfacial activation as it exists in both "closed lid" and "open lid" forms. Movement of the cPLA2 lid possibly exposes a greater hydrophobic surface and the active site. cPLA2 belongs to the alpha-beta hydrolase family which is identified by a characteristic nucleophile elbow with a consensus sequence of Sm-X-Nu-Sm (Sm = small residue, X = any residue and Nu = nucleophile). Calcium is required for cPLA2 to bind with membranes or phospholipids. A calcium-dependent phospholipid binding domain resides in the N-terminal region of cPLA2; it is homologous to the C2 domain superfamily which is not included in this hierarchy. Includes PLA2G4A from chicken, human, and frog.
Pssm-ID: 132839 Cd Length: 505 Bit Score: 105.22 E-value: 8.82e-24
Group IVC cytoplasmic phospholipase A2; catalytic domain; Ca-independent; Group IVC cPLA2, a ...
59-402
4.05e-13
Group IVC cytoplasmic phospholipase A2; catalytic domain; Ca-independent; Group IVC cPLA2, a small 61 kDa protein, is a single domain alpha/beta hydrolase. It lacks a C2 domain; therefore, it has no Ca-dependence. Group IVC cPLA2 is also referred to as cPLA2-gamma. The cPLA2-gamma enzyme is predominantly found in cardiac and skeletal muscles, and to a lesser extent in the brain. Human cPLA2-gamma is approximately 30% identical to cPLA2-alpha. The catalytic domain of cytosolic phospholipase A2 (PLA2; EC 3.1.1.4) hydrolyzes the sn-2-acyl ester bond of phospholipids to release arachidonic acid. At the active site, cPLA2 contains a serine nucleophile through which the catalytic mechanism is initiated. The active site is partially covered by a solvent-accessible flexible lid. cPLA2 displays interfacial activation as it exists in both "closed lid" and "open lid" forms. Movement of the cPLA2 lid possibly exposes a greater hydrophobic surface and the active site. cPLA2 belongs to the alpha-beta hydrolase family which is identified by a characteristic nucleophile elbow with a consensus sequence of Sm-X-Nu-Sm (Sm = small residue, X = any residue and Nu = nucleophile). Includes PLA2G4C protein from human and Pla2g4c protein from mouse.
Pssm-ID: 132841 [Multi-domain] Cd Length: 430 Bit Score: 71.74 E-value: 4.05e-13
Group IVB, IVD, IVE, and IVF cytosolic phospholipase A2; catalytic domain; Ca-dependent; Group ...
60-284
6.50e-11
Group IVB, IVD, IVE, and IVF cytosolic phospholipase A2; catalytic domain; Ca-dependent; Group IVB, IVD, IVE, and IVF cPLA2 consists of two domains: the regulatory C2 domain and alpha/beta hydrolase PLA2 domain. Group IVB, IVD, IVE, and IVF cPLA2 are also referred to as cPLA2-beta, -delta, -epsilon, and -zeta respectively. cPLA2-beta is approximately 30% identical to cPLA2-alpha and it shows low enzymatic activity compared to cPLA2alpha. cPLA2-beta hydrolyzes palmitic acid from 1-[14C]palmitoyl-2-arachidonoyl-PC and arachidonic acid from 1-palmitoyl-2[14C]arachidonoyl-PC, but not from 1-O-alkyl-2[3H]arachidonoyl-PC. cPLA2-delta, -epsilon, and -zeta are approximately 45-50% identical to cPLA2-beta and 31-37% identical to cPLA2-alpha. It's possible that cPLA2-beta, -delta, -epsilon, and -zeta may have arisen by gene duplication from an ancestral gene. The catalytic domain of cytosolic phospholipase A2 (PLA2; EC 3.1.1.4) hydrolyzes the sn-2-acyl ester bond of phospholipids to release arachidonic acid. At the active site, cPLA2 contains a serine nucleophile through which the catalytic mechanism is initiated. The active site is partially covered by a solvent-accessible flexible lid. cPLA2 displays interfacial activation as it exists in both "closed lid" and "open lid" forms. Movement of the cPLA2 lid possibly exposes a greater hydrophobic surface and the active site. cPLA2 belongs to the alpha-beta hydrolase family which is identified by a characteristic nucleophile elbow with a consensus sequence of Sm-X-Nu-Sm (Sm = small residue, X = any residue and Nu = nucleophile). Calcium is required for cPLA2 to bind with membranes or phospholipids. The calcium-dependent phospholipid binding domain resides in the N-terminal region of cPLA2; it is homologous to the C2 domain superfamily which is not included in this hierarchy. It includes PLA2G4B, PLA2G4D, PLA2G4E, and PLA2G4F from humans.
Pssm-ID: 132840 [Multi-domain] Cd Length: 541 Bit Score: 65.05 E-value: 6.50e-11
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
